DATA HARVEST

Data Logging / Accesories / All Accessories

1. OPTIKASCIENCE

1.1. Section 01 - Kits

1.1.1. Physics Laboratory Sets

1.1.2. Basic Kits

1.1.3. Advanced Kits

1.2. Section 02 - Physics

1.2.1. Statics of solids

1.2.2. Dynamics

1.2.3. Translational motion

1.2.4. Rotational motion

1.2.5. Oscillatory motion

1.2.6. Inertia- Collisions - Two-dimension motion

1.2.7. Liquids

1.2.8. Gases and vacuum

1.2.9. Wave's propagation

1.2.10. Sound Waves

1.2.11. Molecular aspect of matter

1.2.12. Temperature and Heat

1.2.13. Geometrical Optics

1.2.14. Wave Optics

1.2.15. Optical Benches

1.2.16. Electrostatics

1.2.17. Electrical conduction

1.2.18. Magnetism and electromagnetism

1.2.19. Atomic Physics

1.3. Section 03 - Technique and Energy

1.3.1. Energy conversions

1.3.2. Renewable energies

1.4. Section 04 - Microscopy

1.4.1. On-field microscopy kits

1.4.2. Biological microscopes

1.4.3. Stereomicroscopes

1.4.4. Multimedia system

1.4.5. Microscopy accessories

1.4.6. Optical magnifiers

1.4.7. Prepared slides for microscopy

1.5. Section 05 - Biology

1.5.1. Botany

1.5.2. Zoology

1.5.3. Experiments on human beings

1.5.4. Human anatomy and DNA models

1.6. Section 06 - Ecology

1.6.1. Kit for environmental analysis

1.6.2. Items for sample's collection

1.6.3. Stations for the detection of air pollution

1.6.4. Digital instruments

1.7. Section 07 - Meterology

1.7.1. Instruments and weather stations

1.8. Section 08 - Astronomy and Earth Science

1.8.1. Rocks, fossils and minerals

1.8.2. Geological models

1.8.3. The Earth and the solar system

1.9. Section 09 – Chemistry

1.9.1. Periodic table of elements

1.9.2. Molecular models and atomic models

1.10. Section 10 – On-Line Science

1.10.1. Interfaces

1.10.2. MBL Sensors

1.10.3. USB Sensor

1.11. Section 11 – Drawing and Mathematics

1.11.1. Drawing

1.11.2. Enumeration

1.11.3. Logics

1.11.4. Fractions and percentages

1.11.5. Geometry

1.11.6. Mathematics on magnetic blackboard

1.12. Section 12 – Measurement Instruments

1.12.1. Lengths and angles

1.12.2. Volumes/Time intervals

1.12.3. Temperature

1.12.4. Density/Forces, weights and masses

1.12.5. Electrical devices

1.13. Section 13 – Lab Tools

1.13.1. Items and instruments

1.13.2. Electrical power sources

2. DATA HARVEST

2.1. Data Logging

2.1.1. Data Loggers

2.1.1.1. Data Logging Range

2.1.2. Sensors

2.1.2.1. Sensor Range

2.1.3. Apps

2.1.3.1. Cross-platform software

2.1.4. Accesories

2.1.4.1. All Accessories

2.2. Dynamics

2.2.1. Dynamics System

2.2.2. Software

2.2.2.1. Cross-platform software

2.2.3. Accessories

2.2.3.1. All Accessories

2.3. Teaching

2.3.1. Teaching Packs

2.3.2. Teaching Metarials

2.4. More Science

2.4.1. Smart Microscopes

2.4.2. Genecon Hand-Held Dynamo

2.4.3. Renewable Energy

2.5. Product Brochures

2.5.1. Primary Teaching Brochure

2.5.2. Secondary Teaching Brochure

3. ERLER-ZIMMER

3.1. Anatomical Models

3.1.1. Skeleton Models

3.1.2. Organs & Structures

3.1.2.1. Respiratory System

3.1.2.2. Brain & Nerves

3.1.2.3. Urinary System

3.1.2.4. Skin-Hair-Nail

3.1.2.5. Head Models

3.1.2.6. Circulatory System - Blood Vessels

3.1.2.7. Circulatory System - Hearts

3.1.2.8. Circulatory System - Circulation

3.1.2.9. Liver

3.1.2.10. Muscular Models

3.1.2.11. Kidneys

3.1.2.12. Ears

3.1.2.13. Torsos

3.1.2.14. Digestive System

3.1.2.15. Teeth

3.2. 3D Anatomy Series

3.3. Medical Simulators

3.3.6.1. Chronic Wounds

3.3.6.2. Diabetes

3.3.6.3. Catheterisation

3.3.6.4. Nursing Dolls - Baby & Child Dolls

3.3.6.5. Nursing Dolls - Adult Dolls

3.3.6.6. Stoma Care

3.3.7. Cancer Prevention

3.3.8. Emergency

3.3.8.1. Airway

3.3.8.2. CPR - Baby & Child Dolls

3.3.8.3. CPR - Adult Dolls

3.3.8.4. All Dolls - Baby & Child Dolls

3.3.8.5. All Dolls - Adult Dolls

3.3.8.6. Rescue

3.3.8.7. Thorax

3.3.8.8. Trauma Simulation

3.3.9. X-RAY / CT

3.3.10. Pregnancy & Birth

3.3.11. Ultrasound

Anemometer

The Anemometer accessory is a traditional 3-cup Anemometer designed to be used with the Count Tachometer adaptor which when coupled together is capable of measuring wind speed and weather patterns....

3300 - Jack Lead 10m with 3.5mm Connector

10 m lead terminated to a 3.5 mm jack plug at each end to connect devices to the Count/Tachometer adaptor....

3275SPP - Colour Filter Slides

Set of four 35 mm colour filter slides for use with the SmartQ Colorimeter Sensor. Red 630nm, Green 560nm, Amber 600nm and Blue 470nm....

3136 - Conductivity Electrode

This Conductivity electrode is used with a SmartQ Conductivity adapter to measure the conductivity of a solution....

3174 - Holey Cap Set

Set of four plastic caps designed to hold sensors upright in standard beakers. Example sensors include Temperature, Oxygen and pH Electrodes....

3321 - Cuvettes (Pack of 100)

10 x 10 mm optically clear 4.5 ml plastic cuvettes in a box of 100 with 10 lids, ideal for use with the SmartQ Colorimeter Sensor....

3271 - Drop/Bubble Counter Replacement Parts Pack

Two 3 way Stopcocks and five plastic tips - replacement parts for the Drop & Bubble Counter....

3286 - E.C.G Patches

Pack of 100 disposable patches for use with the ECG Sensor. The ECG electrode patches are a silver/silver chloride gel on a foil backing. The gel is hypoallergenic and has adhesive properties that enable the electrode to stick to the skin surface. The foil backing provides a constant area of contact and the gel gives a constant skin electrode resistance. A minimum of three of these disposable electrode patches are required for each test subject. Once a pack of electrodes has been opened they should be stored in a cool place, in a clean dry airtight container....

3147SPP - Finger/EarLobe clip (Pleth)

Replacement finger/ear lobe clip (pleth) for the SmartQ Heart Rate Sensor or the Vu Heart rate sensor....

3278SPP - Infrared Detachable Filter

This is a replacement for the 2 mm thick water-free vitreous silica glass detachable filter that is supplied with the Smart Q Infrared sensor. This filter will allow visible and near infrared to pass i.e. 0.15 microns (155 nm) to 4 microns (4,000 nm), but will block out mid and far infrared. When this filter is fitted the sensitivity of the Sensor will be restricted from 0.23 microns to 4 microns...

3107 - K-Type Thermocouple

This K-Type thermocouple is a replacement part for the Temperature High (K-Type) sensor. The thermocouple junction is housed at the end of a 200 x 3 mm AISI 310 stainless steel sheath. It has a one metre long cable that terminates in a mini plug (colour coded green to indicate thermocouple ‘type K’). The metal sheath of the type K thermocouple can withstand temperatures above 1,000 ºC. However, the PVC insulation on the connecting cable has a working range of –10 ºC to 105 ºC, so keep this cable away from the source of heat e.g. by clamping the Sensor in position. Stainless ste...

3005 - Long Sensor Lead

1.5 m sensor lead with a male min-din plug at each end. It is used to connect a SmartQ sensor to an EasySense Data Logger....

3004 - Short Sensor Lead

150 mm sensor lead with a male mini-din plug at each end. It is used to connect a SmartQ sensor to an EasySense Data Logger....

3285SPP - Laser Slides Set

Set of two optical slides for use with the SmartQ Laser Module sensor....

3131 - Oxygen Electrode

This electrode is used in combination with the Oxygen Adaptor to form the dual range Oxygen sensor, capable of measuring oxygen levels in air, or dissolved oxygen levels in water....

6172 - Oxygen Electrode Maintenance Kit

Maintenance Kit for the Oxygen Electrode consisting of three spare membranes and 50 ml of electrolyte....

3274 - Polar Heart Rate Belt - Large

This is the elastic part of the transmitter belt for the Polar Heart rate sensor and does not include the T31 transmitter. Designed to approximately fit chest size 74 to 155 cm (29 to 61 inches)....

3273 - Polar Heart Rate Belt - Small

This is the elastic part of the transmitter belt for the Polar Heart rate sensor and does not include the T31 transmitter. Designed to approximately fit chest size 63 to 115 cm (25 to 45 inches)....

3272 - Polar Non Coded T31 Transmitter

This is the T31 transmitter part of the transmitter belt for the Polar Heart rate sensor, this does not include the elastic belt attachments which can be purchased separately....

5009 - Power Supply 5V UK

5V DC UK mains adaptor able to supply up to 1200 mA with a positive centre and negative outer pin. Replacement product for the following: VISION QAdvanced Q3, Q3+ and Q5, Q5+ Qt Timer ...

Toplam: 41 - Gösterilen sonuçlar: 1 - 20 arası, Sayfa: