THERMODYNAMICS & THERMOTECHNICS

THERMAL Machines

1. PHYSICS

1.1. 3D Physics

2. ELECTRONICS

2.1. Power Supplies, Measurement Equipment and Accessories

2.2. Kits for Circuits Assembly

2.3. Theoretical - Practical Fundamentals

2.3.1. Basic Electrical Laws Concepts

2.3.2. Analog Electronics

2.3.3. Digital Electronics

2.3.4. Semiconductors

2.3.5. Instrumentation & Control

2.3.6. Power Electronics

2.4. Industrial Electronics

2.4.1. Instrumentation & Control

2.4.2. Electrical Servomotors

2.4.3. Power Electronics

2.5. Automotive Electronics

3. COMMUNICATIONS

3.1. Power Supplies, Measurement Equipment and Accessories

3.2. Theoretical - Practical Fundamentals

3.2.1. Coding, Modulation and Signal Processing Theory

3.2.2. Antenna and Microwave Theory

3.3. Applied Communications

4. ELECTRICITY

4.1. Electrical Installations

4.1.1. Home Electrical Installations

4.1.2. Industrial Electrical Installations

4.1.2.1. Maneuver Control and Drives

4.1.2.2. Electrical Risks and Protections

4.2. Home and Building Automation

4.2.1. Conventional Applications

4.2.2. Wireless Zig-Bee Applications

4.2.3. DALI Lighting Automation

4.2.4. KNX/EIB Home/Buildings Automation

4.2.5. BACnet Buildings Automation

4.3. Electrical Machines

4.3.1. Transformers Applications

4.3.2. Generators and Motors Applications

4.3.2.1. AC Electrical Motors and Generators

4.3.2.2. DC Electrical Motors and Generators

4.3.3. Physical Principles and Design of Electrical Machines

4.4. Power Systems, Renewable Energies and Smart Grids

4.4.1. Power Generation and Renewable Energies

4.4.1.1. Generators Synchronization

4.4.1.2. Renewable Energies

4.4.1.3. Power Plants

4.4.1.4. Micro-Grids

4.4.2. Power Transmission and Distribution

4.4.3. Load Management and Control

4.4.3.1. Smart Metering, Energy Management and Net Metering

4.4.3.2. Power Factor Correction

4.4.4. High Voltage Electrical Protections and Cybersecurity

4.4.5. Advanced Smart Grid Power Systems

4.5. Installations and Maintenance

4.5.1. Cutaway Models

4.5.2. Dissectible Models

4.5.3. Installations and Maintenance Training

5. ENERGY

5.1. Power Generation Systems

5.1.1. Renewable Energies

5.1.1.1. Photovoltaic Solar Energy

5.1.1.2. Thermal Solar Energy

5.1.1.3. Wind Energy

5.1.1.4. Marine Energy

5.1.1.5. Geothermal Energy

5.1.1.6. Hydraulic Energy

5.1.1.7. Biofuels

5.1.1.8. Storage Systems

5.1.1.9. Hydrogen Fuel Cells

5.1.1.10. Steam Turbines and Organic Rankine Cycles

5.1.1.11. Other Non-Conventional Systems

5.1.2. Conventional Energies

5.2. Power Systems, Renewable Energies and Smart Grids

5.2.1. Power Generation and Renewable Energies

5.2.1.1. Generators Synchronization

5.2.1.2. Renewable Energies

5.2.1.3. Micro-Grids

5.2.2. Power Transmission and Distribution

5.2.3. Load Management and Control

5.2.3.1. Smart Metering, Energy Management and Net Metering

5.2.3.2. Power Factor Correction

5.2.4. High Voltage Electrical Protections and Cybersecurity

5.2.5. Advanced Smart Grid Power Systems

5.2.6. High Voltage Laboratory

5.3. Installations and Maintenance

5.3.1. Cutaway Models

5.3.2. Dissectible Models

5.3.3. Installations and Maintenance Training

6. MECHATRONICS, AUTOMATION & COMPUMECHATRONICS

6.1. Mechatronics

6.1.1. Control

6.1.1.1. Theoretical-Practical Fundamentals

6.1.1.2. Industrial Controllers

6.1.1.3. Industrial System Applications

6.1.2. Electronics

6.1.2.1. Sensors and Electronic Instrumentation

6.1.2.2. Power Electronics and Industrial Electronics

6.1.3. Hydraulics and Pneumatics

6.1.3.1. Hydraulics

6.1.3.2. Pneumatics

6.1.4. Mechatronic Software

6.2. PLC Automation

6.2.1. PLC Options

6.2.2. Hardware Emulators

6.2.2.1. Manufacturing Systems

6.2.2.2. Flow and Level Control

6.2.2.3. Transport and Sorting

6.2.2.4. Electrical Machines Control

6.2.2.5. Traffic & Parking Control

6.2.2.6. Home and Office

6.2.3. Instrumentation and Control with PLC

6.2.4. Industrial Applications with PLC

6.2.5. Workstation Applications with PLC

6.2.5.1. Pieces Feeding Workstations Applications

6.2.5.2. Processing Workstations Applications

6.2.5.3. Rotary Table Workstations

6.2.5.4. Pieces Manipulator Workstations Applications

6.2.5.5. Robotic Workstations Applications

6.2.5.6. Pieces Identification Workstations Applications

6.2.5.7. CNC Workstations Applications

6.2.5.8. Storing Workstations Applications

6.2.6. Flexible Manufacturing Systems with PLC

6.3. PLC Compumechatronics

6.3.6. Fluid Mechanics

6.3.7. Thermodynamics & Thermotechnics

6.3.8. Chemical Engineering

6.3.9. Food & Water Technologies

6.3.10. Environment

6.3.11. Process Control

7. MECHANICS

7.1. Mechanical Engineering

7.1.1. Mechanics Fundamentals KITs

7.1.2. Simple Machines

7.1.2.1. Mechanisms

7.1.2.2. Gears

7.1.3. Statics and Dynamics

7.1.4. Vibrations and Oscillations

7.1.5. Tribology (Friction)

7.1.6. Structural Mechanics

7.2. Automotive Mechanical Engineering

7.2.1. Brakes and Clutches

7.2.2. Gears, Differentials and Transmissions

7.2.3. Engines

7.3. Materials Engineering

7.3.1. Photoelasticity and Strain Measurement

7.3.2. Materials Testing

7.3.2.1. Mechanical Test

7.3.2.2. Thermal and Acoustic Tests

7.3.3. Manufacturing and Treatment Techniques

7.3.3.1. Casting

7.4. Installations and Maintenance

7.4.1. Cutaway Models

7.4.2. Dissectible Models

7.4.3. Installations and Maintenance Training

8. FLUID MECHANICS

8.1. Fluid Mechanics Modular Laboratory

8.1.5. Flow Visualization

8.1.6. Hydraulic Machines: Pumps

8.1.7. Hydraulic Machines: Turbines

8.1.8. Hydraulic Piping System

8.2. Measurement

8.3. Hydrostatics

8.4. Flow Visualization

8.5. Hydraulic Channels

8.8. Fluid Piping System

8.9. Installation and Maintenance

8.9.1. Cutaway Models

8.9.2. Dissectible Models

8.9.3. Installations and Maintenance

9. THERMODYNAMICS & THERMOTECHNICS

9.1. Fundamentals and Basic Concepts of Thermodynamics

9.2. Heating, Ventilation, Air Conditioning and Hot Water

9.3. Heat Pumps

9.4. Refrigeration

9.5. Thermal Hydraulic Piping System

9.6. Heat Transfer

9.7. Heat Exchangers

9.8. THERMAL Machines

9.9. Internal Combustion Engines

9.10. Installations and Maintenance

9.10.1. Cutaway Models

9.10.2. Dissectible Models

9.10.3. Installations and Maintenance Training

10. PROCESS CONTROL

10.1. Theoretical - Practical Fundamentals

10.2. Controllers & Industrial Communications

10.3. Industrial Applications and System

11. CHEMICAL ENGINEERING

11.1. Unit Operations

11.1.1. Fluidization

11.1.2. Evaporation

11.1.3. Boiling

11.1.4. Distillation and Cracking

11.1.5. Extraction

11.1.6. Difussion

11.1.7. Drying and Cooling

11.1.8. Absorption and Adsorption

11.1.9. Ion Exchange and Corrosion

11.1.10. Crystallization and Pyrolysis

11.1.11. Filtration, Sedimentation and Mixing

11.1.12. Solids Treatment

11.2. Chemical Reactors

12. FOOD & WATER TECHNOLOGIES

12.1. Food Treatment

12.2. Dairy Products Treatment

12.3. Drinking Water Treatment

12.4. Pilot Plants

13. ENVIRONMENT

13.1. Hydrology and Hydrogeology

13.2. Environmental Pollution

13.3. Wastewater Treatment

13.4. Recycling

14. BIOMEDICAL ENGINEERING

14.1. Biomechanics

14.1.1. Mechanics Fundamentals KITs

14.1.2. Simple Machines

14.1.2.1. Mechanisms

14.1.2.2. Gears

14.1.3. Statics and Dynamics

14.1.4. Vibrations and Oscillations

14.1.5. Tribology (Friction)

14.1.6. Structural Mechanics

14.1.7. Photoelasticity and Strain Measurement

14.1.8. Mechanical Tests

14.1.9. Thermal and Acoustic Tests

14.2. Biomedical Electronics

14.2.1. Theoretical-Practical Fundamentals

14.2.1.1. Basic Electrical Laws Concepts

14.2.1.2. Analog Electronics

14.2.1.3. Digital Electronics

14.2.1.4. Semiconductors

14.2.1.5. Instrumentation and Control

14.2.1.6. Power Electronics

14.2.2. Instrumentation and Control

14.3. Biomedical Equipment

TGDEC Computer Controlled Two -Shaft Gas Turbine

The Computer Controlled Two-Shaft Gas Turbine, "TGDEC", developed by EDIBON, is a teaching unit for the operation demonstration of a Double Shaft Gas Turbine for electric generation and for other uses too....

TGDEPC Computer Controlled Two-Shaft Gas Turbine/ Jet Engine

The main element of the "TGDEPC" unit is the High Pressure Turbine, which is also called Gas Generative Turbine....

TGFAC Computer Controlled Axial Flow Gas Turbine/ Jet Engine

The Computer Controlled Axial Flow Gas Turbine/ Jet Engine, "TGFAC", designed by EDIBON is a teaching unit that demonstrates the operation of a gas turbine as reaction engine. Reaction engines are used in planes for propulsion due to their reduced weight and high performance....

HTVC Computer Controlled Solar/Heat Source Vapour Turbine

The Computer Controlled Solar/Heat Source Vapour Turbine, "HTVC", has been designed to provide an easily understood vapour power plant and to demonstrate, on a lab scale, the ability to produce shaft power from Solar Radiation....

TSMEC Computer Controlled Steam Motor and Energy Conversion Unit

The process starts when water is impelled by a computer controlled pump from a storage tank to a computer controlled water boiler, where it is transformed into steam....

TMSC Computer Controlled Stirling Motor

The Computer Controlled Stirling Motor, "TMSC", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy....

TMSB Stirling Motor

The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an electrical generator and load. An ideal stirling cycle has four phases: Phase 1: Constant volume heating of the gas in the hot cylinder.Phase 2: Isothermal expansion at constant temperature in the hot cylinder.Phase 3: Constant volume working in the cold cylinder.Phase 4: Isothermal compression of the gas in the cold cylinder.The Stirling Motor "TMSB" unit designed by EDIBO...

TPTVC/1.5kW Computer Controlled 1.5 kW Steam Power Plant

The Computer Controlled 1.5kW Steam Power Plant, "TPTVC/1.5kW", represents a laboratory scale power plant, guaranteeing a great similarity with a real system. It offers many practical exercises to familiarize the student with the operation procedure of a steam power plant with process control. Besides, it has different optional modules to adapt to the needs of each working place. The process starts with a pre-treatment of the water to avoid the introduction of hard water to the process. EDIBON suggests the Softener Unit, "SFU", as an OPTIONAL unit, to remove the salts, impurities and other substances that may di...

TPTVC/20kW Computer Controlled Steam Power Plant Adjustable up to 20 kW

The Computer Controlled Steam Power Plant Adjustable up to 20 kW, "TPTVC/20kW", represents a laboratory scale power plant, guaranteeing a great similarity with a real system. It offers many practical exercises to familiarize the student with the operation procedure of a steam power plant with process control. Besides, it has different optional modules to adapt to the needs of each working place. The process starts with a pre-treatment of the water to avoid the introduction of hard water to the process. EDIBON suggests the Softener Unit, "SFU", as an OPTIONAL unit, to remove the salts, impurities and other substa...

Laboratory

9TV

Technical and Vocational Education Thermodynamics and Thermotechnics Laboratory

9HE

Higher Education Thermodynamics and Thermotechnics Laboratory

Expansions